Computer chair covers – It is possible to create two computer chair covers: one for the back and the other for the part where you sit. So, starting with place a sufficiently large sheet of tissue paper, the one that the seamstresses use and which you buy in stationery, respectively on the two parts of the chair we want to cover. With the pencil we trace the outline of the two ovals. Making two pieces of paper that we will use as paper patterns.
Applying, with pins, each oval on the fabric that you have chosen and bring the outline with a chalk. Cut the ovals considering leaving more or less five centimeters around the edge. Make a drawstring around for the computer chair covers: a hem of about one centimeter, folded on itself. Leaving an internal channel open in which to slide a rubber band. Sew well at the machine with a straight stitch. Take two rubber bands that are a bit shorter than the circumference of the pattern of each oval.
12 Photos Gallery of: Computer Chair Covers: Do It Yourself
Get a brooch, attach it to the first rubber band and guide it into the drawstring by sliding it until you come out of the other side. Place the oval on the backrest. Pull the rubber bands from the back until the same fits well with the previous padding. Remove the pin and tie the tops of the rubber bands together. Reshape the same procedure for the session; obviously the elastic will be tightened below it. Slide the knots of the rubber bands inside the drawstring, to ensure that the computer chair covers work is clean enough.
This article main ideas is computer chair covers.